ZipModem 2.4GHz USB Wireless Modem

Weight: 0.2 lb.



$24.95
USD

ZipModem is a 2.4GHz USB wireless modem based on RFDigital RFD21733 ultracompact wireless module. Wireless communication between PCs doesn't get any easier. Just connect ZipModem on to the USB port and start sending data using Hyperterminal or any other serial application of your choice. ZipModem shows up as normal serial port in the operating system. USB and Wireless interfaces are completely transparent  to the user application.

 

 

  • Compact and light weight

  • USB and Wireless completely transparent to application

  • WiFi interference tolerant.

  • Heavy 2.4 GHz noise and interference tolerant.

  • Motor noise and interference tolerant.

  • Very low cost.

  • No external parts required.

  • Fully contained, truly finished, ready to use module.

  • CE / ETSI / IC & FCC Certified and Approved (Only RFD21733 Radio Module).

  • Typical range: 500 feet (150 meters)

 

 

 

Comments

Submitted by Anonymous (not verified) on Sat, 12/08/2012 - 17:36.

ZipModem

will this on mac osx lion

Submitted by Anonymous (not verified) on Mon, 05/21/2012 - 05:43.

Zipmodem

You have a wireless relay output board compatible with the zipmodem - do you intend to develop a I/O board for this as well - also are the FOBs compatible with the Zipmodem.
Regds
Mark

Submitted by admin on Mon, 05/21/2012 - 06:59.

Re:Zipmodem

We have a wireless relay controller available that is compatible with Zipmodem and can be found here http://numato.com/crestone-8-channel-wireless-relay-module . We are currently working on wireless GPIO modules as well and should be available for sale in 1-2 months.

Tom